STABLE WITH A PROVEN, EASY AND INTUITIVE GEOMETRY.
SAFETY: EFFICIENT PRE-INFLATED AIRBAG.
COMFORTABLE: DESIGNED WITH AN EXCELLENT SUPPORT DISTRIBUTION.
PIXAIR 2 takes after the PIXAIR design and improves on the following points:
– New parachute pocket: with better sealing, an opening with “tulip” type flaps, an internal pocket to keep the parachute from turning over.
– Easier seated transition.
– Redesigned dorsal pocket with a smaller volume.
– Interchangeable Airbag Mylar stiffener.
– New design
The PIXAIR 2 is the AIRBAG progression harness within the SUPAIR range. On the ground, it is easy to handle and setup before an inflation and takeoff. In flight it is very comfortable with a rather upright posture. Its geometry brings peace of mind in flight by providing a good feedback from the wing.
The PIXAIR 2 is lightweight (3270g in size M), compact and easily folded due to its AIRBAG design. Safety is complete with a high-performance AIRBAG (X g during the certification tests), with a stable geometry, a reserve parachute pocket under the seat plate and an easy to locate reserve parachute handle.
Progression & thermals
Position : upright sitting
Complete AirBag protection under the seat and dorsal with pre-inflated internal cells
Adjustable reserve parachute pocket (bottom right)
Quick release buckles with Safe-T-Bar locking mechanism
30 mm Self-Locking Biners
Self-locking light 25 mm aluminum buckles
Gear & Comfort
Lateral wrapping skirts
Elasticated Speed-Bar recoil
Foot-rest ready (retractable models only)
AIRBAG interchangeable Mylar stiffener
Large dorsal storage pocket independent from Airbag
Zipping lateral storage pockets
Pre-equipped to receive a radio
Pre-equipped to accept the hydration pack
Under the seat speedbar storage capacity
Shoulder straps adjustments
Backrest adjustment with lumbar support
Chest strap adjustment
Adjustable leg-straps length
Seat depth adjustment
Nylon 210D Ripstop
EN 1651 Norm
|Pilot size (cm)||155 / 175||170 / 185||180 / 195|
|Pilot weight (min – max) (kg)||60 – 80||65 – 85||70 – 100|
|Harness weight (delivered) (g)||3160||3270||3380|
|A||Back length (cm)||57||64||70|
|B||Back inclination length (cm)||35||37||38|
|C||Seat length (cm)||46||47||48|
|D||Seat width (cm)||35||37||40|
|E||Carabiners height (cm)||44||45||46|
|F||Distance between carabiners (cm)||36 – 46||36 – 46||36 – 46|
PRODUCT MAKE-UP :
The harness is delivered with the following accessories :
– 2 SUPAIR Zicral 30mm self-locking carabiners
– Parachute pocket handle
– Polypropylene seat plate
– Elasticated Speed-Bar recoil
– User’s manual