Integral built-in neodymium brake magnets
Colours representing the new spirit of APCO Aviation, both striking and functional as they incorporate the 3D cut, shaping the leading edge panels to be sleek and crease free, while allowing for a balanced combination of different fabrics according to their position on the wing.
Hybrid | Small | Medium | Large | X-Large |
---|
Product Codes | 38510 | 38520 | 38530 | 38540 |
Cells | 48 | 48 | 48 | 50 |
Area m2 | 20 | 22 | 24 | 25.56 |
Area (projected) m2 | 16.9 | 18.6 | 20.3 | 21.65 |
Span (incl. Stabiliser) m | 10.1 | 10.6 | 11.0 | 11.59 |
Span (projected) m | 7.9 | 8.3 | 8.6 | 9.06 |
Aspect Ratio | 5.1 | 5.1 | 5.1 | 5.25 |
Aspect Ratio (projected) | 3.7 | 3.7 | 3.7 | 3.79 |
Pilot Weight, Kg (all up) PG | 55-75 | 70-90 | 85-105 | 100-120 |
Pilot Weight, Kg (all up) PPG | 70-95 | 85-110 | 100-125 | 115-140 |
Weight of Canopy Kg | 3.0 | 3.1 | 3.2 | 3.25 |
Root Cord m | 2.43 | 2.54 | 2.65 | 2.65 |
Tip Cord m | 0.43 | 0.45 | 0.47 | 0.47 |
Length of Lines on B m | 6.06 | 6.35 | 6.64 | 7.10 |
Total length of line used m | 315 | 324 | 333 | 352 |
Certification | EN-B DGAC | EN-B DGAC | EN-B DGAC | EN-B - Pending DGAC Pending |
The glider is made from 100% Skytex cloth.
Top surface is a hybrid combination of Skytex 27 and Skytex 33 gr. The 33gr. material is used on the front of top surface as it is the highest loaded part of the canopy and there it is critical to maintain best porosity possible over time.
The rear part of top surface is Skytex 27 gr. for additional weight saving.
Bottom surface is Skytex 27 Gr. Ribs are made from Skytex 33 gr. hard finish.
Lines are all Cousin Trestec, specified in the table below.
| Material | Diameter [mm] | Strength [kg] |
---|
Top | Dyneema | 0.9 | 90 |
Mid & Brake Mid | Vektran | 0.9 | 115 |
Mid a, b, c | Vektran | 1.0 | 153 |
Bottom A, B, C | Aramide | 1.5 | 280 |
Bottom St | Aramide | 1.0 | 130 |
Brake top, St top | Vectran | 0.9 | 115 |
Brake bottom | Dyneema | 2.0 | 230 |
Sail Cloth | Skytex 27 and 33 gr/m2 "Zero Porosity" Ripstop Nylon |
Rib Reinforcement | FLEXON® batten system |
Warranty | 1 year / 100 Hours manufacturing defects only |